机柜降温节能器（Cabinet Cooling & Energy-Saver）

机柜降温节能器（Cabinet Cooling & Energy-Saver）

逆流板式换热，零混风，机柜内空气始终洁净；全铝合金+氟碳涂层，耐盐雾、耐酸碱，-40 ℃~85 ℃长期稳定。扁平 35 mm 机身，背部四孔挂耳，10 分钟完成壁挂或滑轨安装。无需压缩机或制冷剂，仅引入环境常温风即可把柜内温度降低 8–15 ℃，能耗低于 20 W，节能 40 % 以上。

典型适用场景

• 沿海通信基站、风电升压站、海上平台——抗高盐雾、高湿度

• 沙漠/戈壁光伏箱变、油气田 RTU 机柜——抗风沙、耐极端温差

• 城市轨道交通信号所、隧道监控箱——防尘、防鼠、免维护

• 工厂粉尘车间、污水处理站 PLC 柜——耐腐蚀气体，延长电控元件寿命

Cabinet Cooling & Energy-Saver

Counter-flow plate heat exchanger, zero air mixing—cabinet air stays pristine. All-aluminum alloy with fluorocarbon coating resists salt spray, acids and alkalis, operating –40 °C to +85 °C. Only 35 mm thick, four-hole rear bracket for wall or rail mounting in 10 minutes. No compressor or refrigerant—just ambient air drops internal temperature by 8–15 °C while drawing <20 W, cutting energy use >40 %.

Typical environments

• Coastal telecom shelters, offshore wind platforms—high salinity & humidity

• Desert PV substations, oil-field RTUs—sandstorms and extreme ΔT

• Metro signal rooms, tunnel SCADA boxes—dust-proof, maintenance-free

• Industrial dust workshops, wastewater PLC panels—corrosive gas resistance for longer electronics life